Insteon Remote Control Chime Alert Kit and Insteon Remote Control Dimmer Keypad & Tabletop Enclosure, 6-Button – Black

Insteon Remote Control Chime Alert Kit and Insteon Remote Control Dimmer Keypad & Tabletop Enclosure, 6-Button - Black

Insteon Remote Control Chime Alert Kit

Insteon Remote Control Chime Alert Kit

  • Add sound notification to your Insteon network using I/O Linc – Insteon Remote Chime Alert Kit. It enhances your Insteon network by generating a chime to alert you that there is something happening in or around your home. By linking a Wireless Insteon Motion / Occupancy Sensor to the I/O Linc in the kit you can be notified of movement in a specific area of your home. By linking TriggerLinc – Insteon Wireless Open/Close Sensor to the kit, you can trigger a chime to activate if an unauthorized opening or closing of a door or window takes place. A chime can be generated by any ON command from an Insteon device or via a hardwired connection to the I/O Linc from any standard sensor. The chime receiver also features an adjustable volume control, six different electable chime sounds, 32 changeable radio frequency (RF) codes to prevent interference and an operating range of up to 150 feet. Additional plug-in chime receivers can be added for convenient notification throughout your home.

    How It Works
    The chime transmitter connects to the power supply and to the output of the I/O Linc – Insteon Low Voltage / Contact Closure Interface (1 In / 1 Out). All connections are made using the included 20 Foot 2 Conductor, 22-Gauge/AWG Interconnect Wire. The wireless chime receiver simply plugs into any available wall receptacle. When I/O Linc receives a signal from any linked Insteon device or from a hardwired sensor, the built-in relay activates the chime transmitter to send a wireless signal out to the chime receiver triggering the sound notification to go off.

    Other I/O Linc Kits Available:

    • I/O Linc – Insteon Door / Window Sensor Kit
    • I/O Linc – Insteon Telephone Alert Kit
    • I/O Linc – Insteon Garage Door Control & Status Kit
    • I/O Linc – Insteon Remote Control Door Strike Kit
    • I/O Linc – Insteon Indoor/Outdoor Photobeam Entry Alert Kit
    • I/O Linc – Insteon to Somfy RF Drape Control Kit
    • I/O Linc – Insteon Freezer Failure Sensor Kit
    • I/O Linc – Insteon High and Low Temperature Threshold Kit
    • I/O Linc – Insteon Freeze Sensor Kit
    • I/O Linc – Insteon Doorbell and Telephone Ring Alert Kit
    • I/O Linc – Insteon RF Proximity Reader Kit
    • I/O Linc – Insteon Rain Sensor Kit
    • I/O Linc – Insteon Keypad Control Kit

    Using Multiple Chime Receivers
    For larger and multi-level homes, additional plug-in chime receivers can be added to provide you with an audible notification regardless of where you are in your home. Each additional chime module receiver can be plugged into an outlet within 150 feet of the Extenda-A-Chime transmitter. By adding these modules you can receive a chime whether you are in the living room, master bedroom, kitchen, basement, attic or even in the garage.

    Using Distinct Chime Notifications
    I/O Linc – Insteon Remote Chime Alert Kit is versatile in that you can create two distinct chime notifications. By connecting an additional I/O Linc to the chime transmitter, you can create two distinct alerts. For example, you can hear one sound notification when a motion sensor is triggered at the front door to let you know a package has arrived and hear a completely different sound when the garage door opens, the possibilities are endless.

    Six Chime Sounds Available

    • Dong
    • Ding-Dong
    • Westminster Chime
    • Star Spangled Banner
    • Hail, Hail, The Gang’s All Here
    • Jingle Bells

      Applications for the I/O Linc – Insteon Remote Chime Alert Kit

    • Use a motion sensor at the front door to let you know when visitors have arrived
    • Use a water/flood sensor to wake you up if there’s a leak in the middle of the night
  • Specifications

    Brand: Insteon
    Manufacturer Product No.: 50810 – I/O Linc – Insteon Remote Chime Alert Kit
    UPC: 718122393718
    Components:
    • I/O Linc – Insteon Low Voltage / Contact Closure Interface (1 In / 1 Out)
    • 20 Foot 2 Conductor, 22-Gauge/AWG Interconnect Wire, White
    • Plug-In Extend-A-Chime
    • Quick-Start Guide
    • I/O Linc Owner’s Manual
    • Plug-In Extend-A-Chime
    • 12VDC 500mA Regulated Power Supply
    • 20 Foot 2 Conductor, 22-Gauge/AWG Interconnect Wire, White
    • I/O Linc – Insteon Low Voltage / Contact Closure Interface
    • 1.5mm flathead screwdriver
    • Quick Start Guide

Price: $94.99

Insteon Remote Control Dimmer Keypad & Tabletop Enclosure, 6-Button – Black

Insteon Remote Control Dimmer Keypad & Tabletop Enclosure, 6-Button - Black

  • If you have a complete Insteon system installed in your home to control lighting and appliances remotely, you’re already enjoying the convenience of controlling multiple lights and appliances from a single location. This set includes an Insteon Keypad Dimmer along with a Tabletop Enclosure, an attractive, portable enclosure that allows full use of a 6-button keypad while allowing the freedom to place the plug-in controller in any room of your home.

    Watch us install it:

    • Keypad Enclosure Installation Video

      Easy Installation
      You don’t need to be an electrician to install the Insteon KeypadLinc in the Keypad Tabletop Enclosure. Installation takes under 10 minutes! Simply follow the included quick-start guide to connect each wire on your KeypadLinc to the corresponding wire on the included power cord. Wire nuts are included for ease of use. Plug the Keypad Tabletop Enclosure into any non-switched outlet. You’ll be able to link the individual keypad buttons to lights or groups of lights in your home for remote control of lights and scenes at the press of a button. Once configured, this portable controller can be unplugged and moved anywhere in your home without losing its programming.

      Easily Upgrade to Custom-Etched Buttons
      You’ll be able to personalize your Keypad buttons at any time by purchasing a set of six or eight custom-etched buttons. If you already know you want to take advantage of this option, you can purchase the KeypadLinc with custom-etched buttons pre-installed in the Tabletop Enclosure (choose the six- or eight-button set).

      The Keypad Tabletop Enclosure is also available to be purchased separately. This set is also available in white; choose the color that best complements your decor.

      You can also easily change this 6-button keypad to an 8-button keypad using the White 8 Button Change Kit for Keypad.

    • Insteon Keypad Dimmer Switch (Dual-Band), 6-Button, Black
    • Quick-Start Guide
    • 2 mounting screws
    • 3 wire nuts
    • White trim frame
    • Enclosure lid and base
    • 2 enclosure screws
    • 3 wire nuts
    • Strain relief grommet
    • Power cord
    • Quick-start guide

Price: $99.99

Insteon Remote Control Dimmer Keypad & Tabletop Enclosure, 6-Button – White

Insteon Remote Control Dimmer Keypad & Tabletop Enclosure, 6-Button - White

  • If you have a complete Insteon system installed in your home to control lighting and appliances remotely, you’re already enjoying the convenience of controlling multiple lights and appliances from a single location. This set includes an Insteon Keypad Dimmer along with a Tabletop Enclosure, an attractive, portable enclosure that allows full use of a 6-button keypad while allowing the freedom to place the plug-in controller in any room of your home.

    Watch us install it:

    • Keypad Enclosure Installation Video

      Easy Installation
      You don’t need to be an electrician to install the Insteon KeypadLinc in the Keypad Tabletop Enclosure. Installation takes under 10 minutes! Simply follow the included quick-start guide to connect each wire on your KeypadLinc to the corresponding wire on the included power cord. Wire nuts are included for ease of use. Plug the Keypad Tabletop Enclosure into any non-switched outlet. You’ll be able to link the individual keypad buttons to lights or groups of lights in your home for remote control of lights and scenes at the press of a button. Once configured, this portable controller can be unplugged and moved anywhere in your home without losing its programming.

      Easily Upgrade to Custom-Etched Buttons
      You’ll be able to personalize your KeypadLinc buttons at any time by purchasing a set of six or eight custom-etched buttons. If you already know you want to take advantage of this option, you can purchase the KeypadLinc with custom-etched buttons pre-installed in the Tabletop Enclosure (choose the six- or eight-button set).

      The Keypad Tabletop Enclosure is also available to be purchased separately. This set is also available in black; choose the color that best complements your decor.

      You can also easily change this 6-button keypad to an 8-button keypad using the White 8 Button Change Kit for Keypad.

    • Insteon Keypad Dimmer Switch (Dual-Band), 6-Button, White
    • Quick-Start Guide
    • 2 mounting screws
    • 3 wire nuts
    • White trim frame
    • Enclosure lid and base
    • 2 enclosure screws
    • 3 wire nuts
    • Strain relief grommet
    • Power cord
    • Quick-start guide

Price: $89.99