ELK ELK-MM220 Magic Module Programmable Controller with 2 Inputs & 2 Outputs and ELK ELK-MM443 Programmable Controller Magic Module

ELK ELK-MM220 Magic Module Programmable Controller with 2 Inputs & 2 Outputs and ELK ELK-MM443 Programmable Controller Magic Module

ELK ELK-MM220 Magic Module Programmable Controller with 2 Inputs & 2 Outputs

ELK ELK-MM220 Magic Module Programmable Controller with 2 Inputs & 2 Outputs

  • The ELK ELK-MM220 Magic Module Programmable Controller with 2 Inputs & 2 Outputs is is a two digital input, two form C relay output programmable controller. It may be used as a stand alone field programmable controller in a vast array of applications from timers, single zone security system, pulse stretcher, simple process controllers, etc. Features 4 general purpose counters (range 0 to 255 counts), and 4 general purpose timers (range 1/10 second to over 255 hours). The Magic Moduel Programmable Controller offers 4096 program bytes using SIMPLE programming language. It comes factory pre-programmed as a single zone security system and can be re-programmed by using a personal computer. The MM220 program is stored into re-programmable Electrically Erasable Programmable Read Only Memory (EEProm memory).

    Programmable Applications

    • Single Zone Security System
    • Restricted Area Door Annunciator
    • Boat Alarm
    • Cross Zoning
    • PIR Anding
    • Garage Door Controller
    • SPECIALTY Timer (Most Common application)
    • Latching Relay
    • Flip Flop Relay
    • HVAC Control
    • Lighting Control
    • Gate Controller
    • Man Trap (2 Doors)
    • Occupancy Alert Device
    • Inputs: 2 Digital inputs, Jumper programmable for +12v or pull to ground input level. 0 to 2 volts is low, 2 to 15 is Hi.
    • Outputs: 2 Form “C” Relays, 10 Amps @ 120VAC or 7 Amps @ 28VDC; One relay output may be configured as open collector transistor output – 100 ma. Max.
    • Operating Voltage: 9.5-15 Volts DC
    • Current Draw: 10 ma. Nominal, 70 ma. Maximum with both relays active.
    • Enclosure: Black ABS Plastic: 4.5″ x 3″ x 1.2″
    • Surface Mount ABS Enclosure with Snap-On Cover
    • Lifetime Limited Warranty

Price: $55.44

ELK ELK-MM443 Programmable Controller Magic Module

ELK ELK-MM443 Programmable Controller Magic Module

  • The ELK ELK-MM443 Programmable Controller Magic Moduleยฎ is a four analog or digital input, four relay output programmable logic controller (PLC). It may be used as a stand alone field programmable controller in a vast array of applications from timers, door controllers, simple process controllers, multiple zone security controls, etc. or as a networked controller with up to 31 other modules connected on a common RS-485 data bus. The Programmable Controller Magic Module offers 16,384 program bytes using SIMPLE programming language. It features 4 general purpose Counters (range 0 to 255 counts) and 4 general purpose Timers (range 1/10 second to over 255 hours).

    The Magic Module supports transmitting and receiving commands from two way X-10ยฎ Power Line Carrier Devices. Also optional interfaces are available for reading Temperature, Clock/Calendar, and Dallas iButtonยฎ identification devices.

    The Magic Module is programmed by a personal computer. The program is stored into re-programmable Electrically Erasable Programmable Read Only Memory (EEProm memory). The ELK-MB485 is the interface used to transfer the program from the computer the Magic Module.

    • Networked to optional PC and up to 31 ELK-MM443’s through a RS-485 data bus.
    • X-10 Power Line Carrier Interface.
    • Analog transmission MM443 to MM443 and Preset Dim Commands
    • Dallas iButton TouchKey Reader
    • Programs the ELK-MM220 Magic Module (two inputs, two relay outputs)
    • Emulates ELK-MM220 Magic Module for code development
    • Mounts to single or double gang electrical box.
    • Optional DIN Rail Mounting. PCB mounts into 4 inch SnapTrack
    • Lifetime Limited Warranty
    • Inputs: 4 Analog, 0 to 13.6 volts, with jumper programmable 2k pull up resistor to 12 V, or 2k pull down resistor to ground. May be left floating. Software programmable high and low threshold levels per input for end-of-line resistor circuits. Input impedance (floating input) – 100K ohms
    • Outputs: 4 Form “C” Relays, 10 Amps @ 120VAC or 7 Amps @ 28VDC; Two relay outputs may be configured as open collector transistor outputs – 100 ma. Max.
    • Operating Voltage: 9.5-15 Volts DC
    • Current Draw: 10 ma. Nominal, 130 ma. Maximum with all relays active.
    • X-10 Interface: PL513, PSC04 or TW523, PSC05 – 4 wire RJ-11 telephone style
    • Data Bus: RS-485, max bus length: 4000 feet w/22 AWG wire
    • Enclosure: White Plastic: 6.5″ W x 4.375″H x 2″D

Price: $162.16

ELK ELK-P212S Supervised Remote Power Supply 12 VDC

ELK ELK-P212S Supervised Remote Power Supply 12 VDC

  • The ELK ELK-P212S Supervised Remote Power Supply 12 VDC is a Supervised Remote Power Supply / Battery Charger, providing 12 VDC output with up to 2 Amps of total current. It supervises the AC Power Input as well as the rechargeable Battery, and can report abnormal conditions back to an ELKM1 Control over the RS485 four (4) wire data bus. It also features relay outputs for AC and Low Battery to allow “stand-alone” operation with other Controls (Security, Access, CCTV products, etc.). Power from the P212S can be used to increase the capacity of a control, or to remotely power devices such as motion detectors, keypads, zone expanders, sirens, annunciators, etc.
    The P212S monitors the AC Power Input and periodically loads tests the Battery. There are two (2) sets of 12 VDC power outputs with a combined rating of 2 Amps. The outputs are protected against overcurrent by PTC self-restoring circuit protectors. A convenient On/Off switch provides the ability to quickly and easily disconnect both the AC and DC for maintenance. The P212S also includes automatic low battery disconnect circuitry to protect against battery deep discharge during an extended power outage.

    Additional Features

    • Innovative EBT – Elk Battery Technology circuit provides maximum battery life
      – Controlled charge ramp and maintenance algorithm
      – Low Battery cut-off protects battery from deep discharge
    • M1 Control allows
      – Remote power reset of powered peripherals
      – Data-bus supervision of AC and Battery status
    • Stand-alone flexibility
      – Two (2) sets of DC outputs
      – One (1) on-board relay to supervise battery status
      – One (1) on-board relay to supervise AC statu
    • AC Input: 16.5VAC, 45VA (ELK-TRG1640 or equiv.)
    • DC Output Voltage: 13.8 Volts D.C. +/- 5%
    • Current Rating: 2.0 Amps
    • Wattage: 30 Watts
    • DC Output Protection: Auto Resetting PTC
    • Rechargeable Battery Size: Max. 12 Ah
    • Low Battery Cutoff Threshold: ~10 Volts.
    • Load Regulation: + / – 2%

Price: $160.39